Your Source for Process Measurement & Control
Product Groups
Wall-Mount Programmable Temperature Controller
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
CN1511 Series
  • Large, 7-Digit, 7-Segment LED Display 20 mm (0.8") H
  • Multiple Control Modes —On/Off, PID, Heat/Cool
  • 10-Segment Ramp/Soak Program
  • 5 Independent Ramp and Soak Programs
  • Programmable Control Parameters
  • Thermocouple, RTD, and Thermistor Temperature Inputs
  • Current, Voltage, and Millivolt Process Inputs
  • Scaling for Voltage, Current, and Millivolt Signals
  • 4 Programmable Process Alarms (Optional)
  • Relay or Solid State Outputs (Optional)
  • Built-In Buzzer to Sound Alarm (Optional)
  • 2 Programmable Timers (Optional)
  • Easy to View from a Distance
  • Protection from Dust and Moisture
 Manuals (contact with email : [email protected])


Housed in a wall-mount, watertightplastic enclosure, the CN1511 is aflexible temperature controller thatoffers the ease of an on/offcontroller with the precision of afull-blown PID controller. Forapplications that do not require thecomplexity of PID control, this device can be programmed to work assimple on/off controller. Yet forprocesses that require closetemperature conformity, theCN1511 can be run under full PIDcontrol, selectable for either heating(direct acting) or cooling (reverseacting).

The CN1511 accepts 5 differentramp and soak programs, each withup to 10 segments. Separatepass-codes are required forselecting or entering a ramp/soakprogram. This prevents operatorsfrom making any inadvertentchanges. The manual hold featureallows for an indefinite holdanywhere along the ramp/soakprofile. Also offered is a manualsetpoint entry mode for a quickramp-to-setpoint function. Thiseliminates the need to enter acomplete ramp/soak program.

Maximum and minimumtemperature readings arecontinuously tracked, and 4 optionalprocess alarms are available. Theseare programmable over the entirerange of the selected input type. They can be configured as latchingor non-latching, normally open, ornormally closed. There are also2 optional timers that workindependently or in conjunction withprocess limits (e.g., turning on a fan10 minutes after limit 1 temperatureis reached). The time function keepstrack of process run time.

The CN1511 also functions as arate monitor, indicatinginstantaneous as well as averagerate of temperature change. Aprogrammable time base allows therate to be displayed in per second,minute, hour, or any other interval.The CN1511 can also beprogrammed for a rate alarm, whichcan indicate whether a predeterminedrate is exceeded or not achieved.

Additional features include a built-inbuzzer that sounds whenever a limitis reached (available with the relayoption). Visual indication of relayoutput status is given by LEDs onthe front panel. The CN1511 alsohas a power line filter, designed toprovide trouble-free operation inharsh industrial environments.

Input Type:
. J, K, T, E, R, S, B, thermistor
2252 . @ 25°C (77°F), Pt100 RTD
. 0 to 10 Vdc
. 4 to 20 mA loop current
. 0 to 100 mV
CJC Error: ±0.5°C @10 to 45°C
(±0.9°F @ 50 to 113°F)
Resolution: 1°C/°F for T/Cs and
RTDs; 0.1°C/0.2°F for thermistors
Process: 9999, 999.9, 99.99, 9.999
Voltage: 0.05% FS
Current: 0.05% FS
A/D Conversion:
20,000 count A/D converter
Conversion Rate: 7/s (typical)
Red 7-segment LED display,
20 mm (0.8") H
Display Test: on power-up
Power Options:
120 Vac (60 Hz)—standard
220 Vac (50 Hz)—optional
15 Vdc @ 900 mA—optional
Scale:Programmable from 1 to 30000
0.00 to 20.00 (current input),
0.000 to 10.000 (voltage input),
0.00 to 100.00 (millivolt input)
Rate: 0 to 500 seconds
Prop. Band: 0 to 100% of span
Reset: 0 to 50 repeats/min
On/Off Deadband (Programmable):
0 to full scale
Control Output: 5 Vdc drive @ 50 mA
max (internal 5 Vdc source)
Output (Optional):
1. Open collector—6 open-collector
outputs, maximum sink capability
50 mA per output (internal source)
2. Relays—SPST; 1 A @ 28 Vdc
or 0.5 A @ 120 Vac resistive
Output Termination:
Euro-style pluggable connector
Rate: Variable, displayed as rate
change/time base
Enclosure Dimensions:
Case: 192 W x 160 H x 103 mm
(7.55 x 6.29 x 4.05")
Polystyrene with crystal-clear
polycarbonate lid
Ingress Protection:
Up to IP65 (DIN standard)
Weight:1.4 kg (3 lb)
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ