| 							| The trodeks® zSeries wireless sensor system provides Web-based monitoring of Temperature, Humidity, and Barometric Pressure in critical HVAC and               				Refrigeration applications. 
 The compact wireless "End Devices" mount discretely on the wall in clean rooms, 				laboratories, museums, computer server rooms, warehouses, and any remote facility. The              				wireless End Devices are powered by two AA 1.5 volt alkaline batteries (included) that are inexpensive and 				widely available.
 
 The End Devices transmit up to 300 feet (without obstructions or i				nterferences) to a "Coordinator" connected directly to an Ethernet network and the Internet. The wireless               				system complies with IEEE 802.15.4 operating at 2.4 GHz.
 
 The trodeks zSeries system let's you monitor and record Temperature, Relative Humidity, and				Barometric Pressure over an Ethernet network or the Internet without any special               				software-just your Web Browser.
 
 trodeks offers a selection of End Devices for a variety of applications. Each End Device 				supports one, two, or three internal sensors. If you need an external probe for your application, check out the zED-P Series.
 
 Each Coordinator can directly support up to thirty-two (32) 				End Devices. The trodeks wireless Coordinators include AC adapters to operate on any voltage worldwide from 100               				to 240 Vac and 50/60Hz. The zSeries Coordinator connects directly to an Ethernet Network or the Internet. Unlike an RS232 or 				USB device, it does not require a host               computer.
 
 The zSeries Coordinator is an independent node on the network sending and receiving data in standard TCP/IP packets. 				It is easily configured from a Web Browser and can be               password protected. From within an Ethernet LAN or over 				the Internet, the user simply types the IP address (such as 192.168.1.200) or an easy to remember name (such as               				"Warehouse 5" or "Chicago Lab") and the Coordinator serves a Web Page with the current readings.
 
 The device can trigger an alarm if variables go above or below a set point that you determine. Your alarm can be 				sent by email to a single user or to a group distribution               list, including text messages to cell phones. The				trodeks "Mail Notifier" software is a free and easy program for this application.
 
 The zSeries wireless sensor system is easy to install, simple to operate, and features trodeks's award-winning iServer 				technology with an Embedded Web Server that requires              no special software.
 
 The zSeries system serves Active Web Pages to display real time readings and charts of temperature, humidity, and barometric 				pressure. You can also log data in standard                 data formats for use in a spreadsheet or data acquisition program 				such as Excel or Visual Basic. trodeks offers a free and easy to use program for logging data to Excel.
 
 The virtual chart viewed on the web page is a JAVAtm Applet that records a chart over the LAN or Internet in real 				time. With the zSeries system there is no need              to invest time and money learning a proprietary software program 				to log or chart the data.
 
 Chart scales are fully adjustable on the fly. For example, the 				chart can display one minute, one hour, one day, one week, one month or one year. Temperature and humidity                				can be charted across the full span (-40 to 125°C, and 0 to 100% RH) or within any narrow range such as (20 to 30°C).
 
 trodeks offers an OPC Server software that makes it easy to integrate the zSeries wireless sensor				system with many popular Data Acquisition and Automation programs               offered by trodeks, Wonderware, iConics,				Intellution, Rockwell Automation, and National Instruments, among others.
 
 
 |  | 
			|  | 
			| 							| SPECIFICATIONS
 SENSOR SPECIFICATIONS (zED)
 
  |  | 
			| 							|  TEMPERATURE Accuracy/Range:
 zED-T
 ±0.5°C for 10° to 55°C(±0.9°F for 50° to 131°F)
 ±1°Cfor -18° to 10°C(±1.8°F for -0.4° to 50 °F)
 zED-BTH, zED-TH
 ±0.5°Cfor 0°Cto 45°C(±0.9°F for 32° to 131°F)
 ±1°Cfor -18° to 0°Cand 45° to 55°C
 (±1.8°F for -0.4° to 32°F and 113° to 131°F)
 Refer to Chart
 zED-BT (See replacement product  for details
 
 Resolution: 0.1°C
 Repeatablilty: ±0.1±C, for zED-BTH, zED-TH
 RELATIVE HUMIDITY
 Accuracy/Range:
 zED-BTH, zED-TH
 ±2% for 10 to 90%;
 ±3% for 5 to 10% and 90 to 95%;
 ±4% for 0 to 5% and 95 to 100%
 Hysteresis: ±1% RH
 Non-linearity: ±3%
 Repeatability: ±0.1%
 Resolution: 0.1%
 
 BAROMETRIC PRESSURE
 Accuracy/Range:              zED-BTH, zED-BT
 ±2 mbar for 10 mbar to 1100 mbar
 (1 KPa to 110 KPa)
 Resolution: 0.1 mbar
 
 INTERFACE SPECIFICATIONS (zCDR)
 Ethernet: 10Base-T (RJ45)
 Supported Protocols: TCP/IP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet
 LED Indicators: Network Activity, Network Link, Diagnostics, Receive and Power
 Management: Device configuration and monitoring through embedded WEB server
 Embedded WEB Server: Serves WEB pages ( JAVA° Applets) containing real-time data and live updated charts within definable time intervals
 |  | 
					| 									| POWER (zCDR) Power Input: 9 to 12 Vdc
 Consumption: 2.5 W max
 Safety Qualified ac Power Adapter (included)
 Nominal Output: 9 Vdc @ 0.5 A
 Input: 100 to 240 Vac, 50/60 Hz
 Power Adapter Operating Temp:
 0° to 40°C(32° to 104°F)
 |  |   Universal ac Power Adapter
 
 |  | 
  		  			| 									| POWER (zED) Alkaline Battery: two 1.5 Vdc, supplied
 Lifetime: Estimate of 2 years with frequency of  1 reading per 2 minutes
 
 WIRELESS COMMUNICATION
 Standard: IEEE 802.15.4, DSSS
 Frequency: 2.4 GHz (2400 - 2483.5 MHz), 16 channels
 Network Topology: Star Topology
 Range: Up to 91 m (300 ft) without obstructions or interference
 
 ENVIRONMENT
 Operating Temperature (zED): -18° to 55°C(-0.4° to 131°F), 90% RH non-condensing
 Operating Temperature (zCDR): 0° to 70°C(32° to 158°F), 90% RH non-condensing
 Storage Temperature: -40° to 125°C(-40° to 257°F)
 
 GENERAL
 Approvals:
 FCC: Part 15C.
 CE: EMC 2004/108/EC, LVD 2006/95/EC, R&TTE 1999/5/EC, SRRC.
 Software: The software packages available for the zSeries wireless system are iConnect (configuration software for the Ethernet interface),               iLog (Excel-based software for automatic data logging), and Mail Notifier (email alarm notification software).
 
 A complete wireless system requires one Coordinator (zCDR) and at least one (1) End Device (zED-*) Compact-Commercial enclosure or High-Power NEMA 4 type (zED-*-P, zED-*-LCD, zED-*-CCELL, zED-x-DC).
 
 We recommend the newest  &  for all the new applications.
 |  |