Your Source for Process Measurement & Control
Product Groups
Programmable DC Speed Control with Closed Loop Feedback and Digital LED Display for DC Motors Rated to 2 HP
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
OMDC-MD DC Speed Control
  • Adjustable Min/Max Speed
  • Adjustable Accel/Decel
  • NEMA 4X (IP66) Rating
  • Universal Power Supply, 85-265 Vac
  • Programmable Power-On Initial Settings
  • Jog Function Selectable from Many Input Options
  • Non-Volatile Memory Allows All Custom Settings to Be Stored for Future Use
  • Program Display for Any Engineering Unit
  • Speed Feedback Required (Encoder)
 Manuals (contact with email : [email protected])


TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
OMDC-MD10P controllers are used with linear encoders for precise speed control in trodeks's manufacturing process for metal sheath thermocouple wire.

TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
Sample Application: Synchronized conveyor controller with jog switch, the slave conveyor 2 will follow changes in speed made to the master conveyor 1. The jog switch allows positioning of conveyor 2 when system is stopped.

The OMDC-MD Series is a compact,programmable DC speed control with digitalclosed loop feedback and LED display for DCmotors rated to 2 horsepower. An on-boardmicroprocessor with non-volatile memory,coupled with sophisticated internal software,makes the OMDC-MD series speed control theultimate value in accuracy and control.Programmable parameters includemaximum and minimum set speed, decimalpoints, and operating mode (master orfollower).

The OMDC-MD series speed control issimple to operate: set the desired RPM, rate,or time in the large 1/2" LED display bydepressing the “Up” and “Down”pushbuttons on the front panel. Settings canbe one digit at a time or fast sweep. TheOMDC-MD series speed control settings areexact and repeatable. It will precisely controlspeed to ±1/2 RPM of set speed, long term.No calibrations of the control are necessary.

The OMDC-MD speed control is available in both 1/8 DIN and 1/4 DIN industry standard cutout dimensions,providing easy panel installation. These DC motor controllers can be set to RPM, FPM, GRP, process time, or any otherengineering unit for easy operation.

-10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50/60 Hz
Overload Capacity: 200% for 1 min
Speed Signal Input: 0-5 to 0-24 Vdc, 50K Pulses/Minute (833 Hz)
On-Board Power Supply: 5 Vdc, 50 mA
Faceplate Dimensions:
    OMDC-MD10P: 115 W x 58 H x 117 mm D (4.539 x 2.289 x 4.625")
    OMDC-MD3P: 115 W x 106 H x 117 mm D (4.54 x 4.18 x 4.625")

NOTE:   Speed feedback is required (encoder). Recommended:   OMDC-PU-40E (see below).
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ