Your Source for Process Measurement & Control
Product Groups
SiNET™ Multi-Axis Motion Control
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
HUB 444
  • Networks Stepper Drives (1240i, 3540i, Si3540, ST series, STAC6 series, STM23 series) for Multi-Axis Motion Applications
  • Programmable with Easy-to-Use SiNet Hub Programmer™
  • 4 Optically Isolated Inputs, 5 to 24 Vdc
  • 4 Optically Isolated Outputs, 24 Vdc, 100 mA
  • Hub Programs and Host Computers Also Have Access to the I/O in Each Drive
  • Powered by Drive #1, No External Power Supply Required
  • Compatible with MMI-01 (Operator Terminal)
  • Communication via RS232
  • Sample Motion Programs Available by Request
 Manuals (contact with email : [email protected])


The SiNet™ Hub 444 allows up to 4 Stepperor Servo Si™ drives to be controlled in hostmode from a single PC or PLC’s RS232serial port or will run in stand-alone mode.Each indexer-drive acquires its unique address from the port to which it is connected. This simple addressing schememinimizes the cost of the drives, and moreimportantly, the cost of configuring and/orreplacing drives in your system. Connectionsare made with low cost, reliable RJ11 cabling.Any of our popular, cost effectiveprogrammable Stepper or Servo Si™ drives or Si™ motor controls can be used with theSiNet™ Hub 444. By choosing the power leveland features you need for each axisof your application, SiNet™ can provide acost effective single or multi-axis motionsolution. The SiNet™ Hub 444 is powered bythe drive that’s connected to port #1, savingyou the cost and installation expense ofusing a separate power supply. OurSi Command Language™ (SCL) allows ahost PC or PLC to execute relative, absoluteand homing moves, make status inquiries,sample inputs, set outputs, and more.If your application requires a single axis tooperate in "host mode", you can connect anyof our programmable Si™ drives directly toyour PC via the SiNet™ Hub 444 and invokethe Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

Our SiNet Programmer™ Windows software allows theuser to create and store multi-axis motioncontrol programs in the SiNet™ Hub 444and run them without a PC, thus allowingthe user to create a complex multi-axismotion system controlled from an operatorinterface or trigger.
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ