Your Source for Process Measurement & Control
Product Groups
Digital Closed Loop Controller For Use With AC or DC Adjustable Speed Drive Systems
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
OMDC-ASP10 Digital Closed Loop Controller
  • Connects to Speedpot Input of AC and DC Motor Drives
  • Adjustable Min/Max and Accel/Decel Speeds
  • Pulse Input Capacity of 50,000 PPM, 833 Hz
  • Display Programmable for All Engineering Units
  • NEMA 4X Rated Faceplate
  • Universal Power Supply: 85 to 265 Vac
  • Programmable Alarm Output
  • Multiple Operational Modes: Rate, Time, Follower
  • Output is 0-2 to 0-24 VDC
 Manuals (contact with email : [email protected])


TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
Sample Application: A pump control which displays liters per minute with an alarm to warn operator of low or stopped flow

The OMDC-ASP10 is a compact, economicalcontrol that can be used with conventionalAC, DC, or Brushless DC adjustable speeddrive systems to provide an LED display ofset speeds and precise, digital closed loopmotor speed control. An on-boardmicroprocessor with non-volatile memorycoupled with sophisticated internal softwaremakes the OMDC-ASP10 the ultimate inaccuracy and control. Target speeds aredisplayed directly in RPM, FPM, GPM,process time, or any other engineering unitof measure. Friendly front-panel fieldprogramming permits customizing thecontroller to the exact specifications foreach application; maximum and minimumset speed, decimal points or colon,operating mode (master or follower), andthe constant which takes into account motorgear ratios.

The OMDC-ASP10 is simple tooperate… just set the desired RPM, rate, or time in the large ½" LED display bydepressing the "up-down" pushbuttons,one digit at a time or fast sweep. TheOMDC-ASP10 settings are exact andrepeatable. It will precisely control speed to aremarkable ±½ RPM of set speed, long term.The panel mount unit is easy to install into astandard 18 DIN cutout. All wiring connectsdirectly to a rugged screw type terminal stripthrough the easy access rear panel.

Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50 to 60 Hz
Transducer Signal Input: 0-5 to 0-24 Vdc
On-Board Power Supply: 5 Vdc, 50 mA for external sensors
Cutout: 92 W x 45 mm H (3.62 x 1.77")
Dimensions: 115 W x 58 H x 117 mm D (4.54 x 2.29 x 4.63")
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ