Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Product Groups
Explosion Proof - Intrinsically Safe Industrial Pressure Transmitter
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
PX880
PLACE ORDER 
  • Explosion Proof and Intrinsically Safe FM & CSA Ratings
  • Miniature Size
  • ±0.25% Accuracy
  • All Welded 316 Stainless Steel Construction
  • Zero & Span Adjustability
  • Full 5:1 Range Turndown
    (on ranges ≥100 psi)
  • 4-20 mA Output
 Specs
 Manuals (contact with email : [email protected])
 Print
Description

Description

The PX880 Series comprises themost compact, durable, accurate,cost-effective, full-featured pressuretransmitters available. The 4 to 20mA output is standard, with a12 to 48 Vdc power supply.

Designed for stable performancein the toughest environments, with316 SS welded construction, PX880transmitters are ideal for use withcorrosive media and in hazardousenvironments.

Both models have FM and CSAExplosion Proof and Intrinsically Safe approvals andmeet NACE standards for offshoreapplications. With the cover retainedby a stainless steel chain and nointernal jumpers for span turndown,losses due to misplaced or droppedparts are eliminated.

The small size and light weight ofboth models eliminate anycomplicated mounting hardware ormechanical supports, which reducesinstallation time substantially. Theintegral junction box permits simplefield wiring without the need foradditional hardware, and adds tothe speed and ease of installation.

OPERATION
The heart of the PX880 pressuretransmitter is a silicon piezoresistivesensing chip. This miniaturemicroetched semiconductor gives a voltage output proportional to theapplied pressure. The chip isisolated from the process media bya stainless steel diaphragm.Silicone oil is used to transmit theprocess pressure to the sensor.

An amplifier PCB enclosed in asealed chamber is used to convertthe millivolt signal from the sensorto a calibrated 4 to 20 mAtransmitter output. Feed-throughsfor EMI and RF protection are usedbetween the amplifier board and theterminal housing.

Each transmitter is tested over bothpressure and temperature ranges.A compensator circuit is used tobring the output of the sensor intospecification. After compensation, every transmitter is tested a secondtime for pressure and temperatureeffects to ensure that it meetsperformance specifications. Thetransmitters are calibrated tothe upper ranges listed in the orderbox, but end users can recalibratethem to different ranges.Recalibration is done via 3 screwpotentiometers inside thetransmitter’s head. Recalibrating toany range between the 2 listedfor a particular sensor can beaccomplished with a knownpressure source.

The PX881 is flush diaphragmpressure transmitter, designed tomount flush against process mediaand to prevent any media particlesfrom collecting at the diaphragm.



SPECIFICATIONS
Excitation: 12 to 40 Vdc with reverse polarity protection
Output: 4 to 20 mA (2 wire)
Accuracy: ±0.2% of calibrated span including linearity, hysteresis and repeatability
Max Loop Resistance: 600 &trodeks; @ 24 Vdc max &trodeks; = (supply voltage - 12) x 50
Storage Temperature: -40 to 100°C (-40 to 212°F)
Operating Temperature: -40 to 100°C (-40 to 212°F)
Compensated Temperature: -29 to 82°C (-20 to 180°F)
Thermal Effects: Zero and span combined ±0.02% upper range/°F (30 to 130°F) ±0.032% upper range/°F (-20 to 180°F)
Proof Pressure: 200% upper range
Stability: ±0.5% of upper range for 6 months
Vibration: 0.1% upper limit for 3 g @ 200 Hz
Approvals: FM (Intrinsically Safe for Class 1, 2, 3 Div 1 Groups A, B, C, D, E, G; Explosion Proof for Class 1, 2, 3 Div 1, Groups B, C, D, E, G NEMA 4 enclosure) CSA (Intrinsic Safety for Class 1, 2, 3, Div 1 Groups A, B, C, D, E, F, G; Explosion Proof for Class 1, 2, 3 Div 1, Groups B, C, D, E, F, G Enclosure 4)
Wetted Parts:
PX880: 316 SS
PX881: 316 SS, PTFE gasket and Hastelloy diaphragm
Pressure Port:
PX880: 1/2 NPTF
PX881: Weldolet pipe coupling
Electrical Connection: 1/2 NPTF
Body Material: 316 SS
Cast Head: CF-8M (316 cast SS) with Buna-N O-ring
Fluid Fill: DC 200 silicone oil
Response Time: 20 ms
Weight: 725 g (1.6 lb)
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ