Your Source for Process Measurement & Control
PRE-WIRED STRAIN GAGES- Linear Gages- X-Y Planar Rosettes (Tee Rosette)- 0°-45°-90° Planar Rosettes
KFH SeriesPLACE ORDER
- Pre-Wired Gages Make Installations Easy!
- No Soldering at the Measuring Point
- Linear Gages, 0.3 mm to 20 mm Grids
- XY Gages (Tee Rosettes) 0.6 to 6 mm Grids
- 0°/45°/90° Planar Rosettes 0.6 to 6 mm Grids
- Each Gage has 50 mm of PTFE Cable before Transitioning to AWG 28 Leads to Prevent Leads from Adhering During Installation
- Rugged Polyimide Carrier
- Fully Encapsulated Gages for Protection from the Environment
Description Linear pattern precision gages withminature and medium length gridsare for general purpose and stressanalysis applications. Availablewith either two 1-meter leads orthree 3-meter leads and 120 Ω or350 Ω resistance. All models arecompensated for steel.
The planar XY pattern (0 / 90°) allowsprecision strain measurement byeliminating the errors oftenassociated with a stacked XYpattern. These gages are availablewith either two 1-meter leads orthree 3-meter leads per grid andare compensated for steel.
The planar rosette pattern (0 / 45°/ 90°) allowsprecision strain measurementby eliminating the errors oftenassociated with a stacked pattern.These gages are available witheither two 1-meter leads or three3-meter leads per grid and arecompensated for steel.
Specifications See Spec Sheet for full specifications
Strain Gage Construction Foil strain gage with embedded measuring grid
Thickness µm (microinch) 3.8 or 5 (150 or 197), depending upon strain gage type
Carrier Material Polyimide
Thickness µm (microinch) 45 ± 10 (1.772 ± 394)
Connections PTFE wire, Ø - 0.051 mm², approximately 50 mm long, connected to AWG 28 ribbon cables (PVC insulated) through solder sleeves in 2- or 3-wire configurations
Nominal Resistance Ω 120 or 350 depending upon gage
Resistance Tolerance % ±0.35, with 0.6 mm and 1.5 mm grid length % ±1
Gage Factor approximately 2 (stated on package)
Gage Factor Tolerance % ±1, with 0.6 mm and 1.5 mm grid length % ±1.5, temperature coefficient of gage factor 1/K [1/°F] (115 ± 10) x 10-6 [(64 ± 5.5) x 10-6, nominal value of gage factor temperature coefficient Specified on each package
Applicable Bonding Materials
Cold Cure Adhesives SG496, SG401
Heat Cure Adhesives TT300
Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ