Your Source for Process Measurement & Control
Spring Loaded Fittings for 1-4" Diameter Probes
SLK/SLF SeriesPLACE ORDER
- Easy Installation on Any ¼" Diameter Probe (RTD, Thermcouple or Thermistor)
- Self Gripping Spring Design Allows Unlimited Adjustability
- Great For Installing Replacement Sensors in Thermowells
- Spring Loaded Fitting Can be Used with a Wide Variety of ½ NPT Connection Heads
Description These spring loaded fittings provide another easy way to utilize your trodeks temperature sensors.
Do you need to install a 1/4" diameter sensor in a thermowell without the use of a connection head? Install the 1/4-SLKspring loaded fitting onto your sensor to insure proper contact with the bottom of your thermowell without worrying if your sensor is over inserted or under inserted into the thermowell bore.
If you need to install your sensor in a thermowell while also using an enclosure for your wire connections, the SLF-12-12-14 spring loaded fitting can be used along with one of our extensive line of sanitary or industrial connection heads.Did you have a sudden failure and need to replace your thermowell mounted RTD or thermocouple? If you have one of our cuttable RTD Sensors or Thermocouple sensors, just cut the sensor to length, add a spring loaded fitting and you are up and running.
Installation is simple with no tools required, simply do the following:
To install the single sided ¼-SLK fitting, slide the hex housing onto your probe with the 1/2 NPT threads pointed toward your thermowell or other suitable attachment point. Slide the self-gripping spring ontoyour probe with the wide end toward the hex housing and slide into place. The position of theassembly can then be adjusted as needed.
For the SLF12-12-14, slide the probe tip into the larger openingend of the fitting, twist the probe clockwise while pushing the probe through the fitting. Installthe probe to the desired length, if needed the probe can be pulled through to re-adjust theposition of the fitting.
Materials: 300 Series Stainless Steel.Mounting Threads: The 1/4-SLK has a 1/2NPT threaded connection one end, the SLF-12-12-14 has a 1/2NPT threaded connection both ends.Sheath Size: The springs used in these fittings are a self gripping design for use on standard 1/4" sheaths.Spring Compression: These springs are designed for a nominal compression of approximately 1/2". Spring material: 0.035" diameter music wire (ASTM A228)
Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ