Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
PLATINUMTM Series Universal Benchtop Digital Controllers
CS8DPT
PLACE ORDER - UL and cUL Certified
- Universal Inputs: Thermocouple, RTD, Thermistor, Process Voltage/Current, and Strain
- Simple to Configure and Use
- Standard USB with Optional RS232/485 and Ethernet Communications
- High Accuracy
- Internal 5A SSR Control Output
- 5-Year Warranty
- Dual Display Standard, Indicates Both Setpoint and Real-Time Process
- Auxiliary Output to Drive Higher-Current SSRs
- Totally Programmable Color Displays, Standard
- Operates from 90 to 240 Vac @ 50/60 Hz
Description
Description
The trodeks® CS8DPt is aportable benchtop digital controllerand with a large color-changingdisplay. This benchtop controller featuresdual LED displays that canbe programmed to change colorbetween Green, Amber, andRed at any setpoint or alarmpoint. Other options include, serialcommunications, andEthernet.
This universal temperatureand process instrumenthandles 10 common types ofthermocouples, multiple RTDs,thermistorsand several process (DC) voltage & current ranges, and strain type of inputs.
Specifications
Accuracy: See table on Spec Sheet for details
Resolution: 1°/0.1°; 10 µV process
Temperature Stability:
RTD: 0.04°C/°C
Thermocouple: 25°C (77°F); coldjunctioncompensation of 0.05°C/°C
Process: 50 ppm/°C
CMRR: 120 dB
A/D Conversion: Dual-slope
Reading Rate: 20 samples per second
Digital Filter: Programmable
Display: 4-digit, 9-segment LED;Red, Green, and Amber, andprogrammable colors for processvariable, setpoint and temperature units
Input Types: Thermocouple, RTD, thermistor,analog voltage, analog current and strain
Thermocouple Type (ITS 90):J, K, T, E, R, S, B, C, N, L
RTD Input (ITS 68): 100/500/1000 OhmPt sensor; 2-, 3- or 4-wire;0.00385 or 0.00392 curve
Thermistor Input: 2252 Ohm, 5K Ohm, 10K Ohm
Voltage Input: 0 to 100 mV, 0 to 1 Vdc,0 to 10 Vdc
Input Impedance: 10 MO for 100 mV,1 MO for 1 or 10 Vdc
Current Input: 0 to 20 mA (5 O load)
Strain Input: 0 to 50, 0 to 100 mV
Configuration: Differential
Polarity: Bipolar
Decimal Selection: None or 0.1 fortemperature; None, 0.1, 0.01 or0.001 for process
Control Output: 5A SSR (internal),3A relay max, analog process output
Excitation: Firmware selectable to 5, 10, 12, and 24Vdc @ 25mA
Network and Communications
Ethernet: Standards compliance IEEE802.3 10 Base-T
Supported Protocols: TCP/IP, ARP,HTTPGET
RS232/RS485: Selectablefrom menu; both ASCII and Modbusprotocol selectable from menu;programmable 1200 to 115K baud;complete programmable setupcapability; program to transmit currentdisplay, alarm status, min/max, actualmeasured input value and status
Connection: USB, Ethernet (option), Series (option)
General
Power: 90 to 240 Vac, 50 to 60 Hz
Dimensions: 236W x 230D x 108mmH (9.3'x9.1'x4.3')
Weight:1.13kg (2.5lb)
Note: Power cords are available from trodeks.
Embedded Internet
This trodeks benchtop devices canserve Web pages over an EthernetLAN or even over the Internet,making it possible to monitor andcontrol a process through a Webbrowser (such as Microsoft InternetExplorer®) from anywhere in thefacility or anywhere in the world.
Remote Control
For example, using an CS8DPtSeries temperature controller tocontrol a heater, an engineer canmonitor the temperature, changesetpoints or alarm points, turn theheater on and off, or make othermodifications from anywhere on thelocal network or anywhere on theInternet. The Web pages are easilycustomized, and secure, password protectedaccess to the devices iseasily controlled. And it requiresabsolutely no special software onthe engineer’s computer to view thedata and “supervise” the controller—nothing other than a Web browser.
E-Mail and Alarm
In fact, the Cs8DPt controllercan even send an e-mail to theengineer (or anyone he or shechooses) about an alarm conditionor to update the status. Leveragingthe technology of the Internet, theengineer could receive a messagefrom the controller onan Internet-enabled pager or cellphone.
Most remarkable is that all thiscan be accomplished without acomputer. The trodeks® CS8DPt controllerwith fully loaded communication options connects directly to the Ethernetnetwork—not to the serial port of acomputer functioning as a “server”and “master” to “slave” instrumentsconnected through serialcommunications. With the loaded C24 option, these devices are also available withRS232 and RS485, and MODBUSserial communications.
Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ