Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Product Groups
Power Supplies for Stepper Drives
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
PS Series
PLACE ORDER 
  • Universal Input Voltage Range from 85 to 265 Vac
  • Built-In Active PFC Filter, PF>0.95, Conforms to EN61000-3-2
  • Pending for Safety Approvals: CE, CCC, UL/CSA/EN60950
  • EMI: Conform to EN55011-B, EN55022-B, FCC-B
  • EMS: Conform to EN61000-4- 2,3,4,5,6,8,11
  • LED Power Good Indicator
  • Peak Current for Motor Application
  • 100% Full Load Burn-In Test, High Performance, High Reliability.
  • Compact Size, 15% Smaller than Conventional Products.
 Manuals (contact with email : [email protected])
 Print
Description

Description

Most stepper drives require aseparate DC power supply for operation.trodeksmation™ offers two power supplies thatare matched for use with our stepper drive selection: the OMPS150A24and the OMPS300A48.
Both power supplies are switched-mode,regulated DC power supplies with active PFCfilters. The OMPS150A24 is 24 Vdc, 6.3 A (150 W)while the OMPS300A48 is 48 Vdc, 6.7 A (300 W).

Protect your power supply from motor regeneration with the OMRC-050 regen clamp... see "Specs" above for details.

OMPS150A24 SPECIFICATIONS
Nominal Output Voltage: 24V
Maximum Output Current: 6.3 A
Peak Output Current: 9.5 A
Maximum Output Power: 151.2 W
Efficiency (Typical) (115/230 Vac)1:82/85%
Input Voltage Range: 85 to 265 Vac(47 to 63 Hz) or 120 to 370 Vdc
Input Current (Typical) (115/230 Vac)1:1.8/0.9 A
Inrush Current (Typical): 16 A at115 Vac, 32 A at 230 Vac, Ta = 25°C(77°F), cold start
Harmonic Current: Compliance toEN61000-3-2
Power Factor (Typical) (115/230 Vac)1:0.99/0.95
Output Voltage Range: 21.6 to 26.4V
Ripple and Noise (115/230 Vac)1, 2:150 mV
Line Regulation2: 96 mV
Load Regulation2: 120 mV
Temperature Coefficient: Less than0.02 %/°C
Over Current Protection3: 6.6/9.7 A
Over Voltage Protection4: 27.6 to 32.4V
Hold-Up Time (Typical) (115/230 Vac)1: 20 ms
Leakage Current: 0.75 mA max,0.25 mA (Typical) at 115 Vac, 0.5 mA(Typical) at 230 Vac
Series Operation: Possible
Remote ON/OFF Control:Option, CN3: 4 to 10V, Power ON;0 to 0.8V, Power OFF
Operating Temperature: -10 to 70°C(14 to 158°F)
Operating Humidity: 20 to 90% RH(no dewdrop)
Storage Temperature: -30 to 85°C(-22 to 185°F)
Storage Humidity: 10 to 95% RH(no dewdrop)
Cooling Method: Convection cooling/forced air cooling
Withstand Voltage:
    Input - Output: 3.0 KVac (20 mA)
    Input - FG: 2.0 KVac (20 mA)
    Output - FG: 500 Vac (100 mA)for 1 min
Isolation Resistance: More than100MΩ at Ta = 25°C
(77°F) and 70%RH, Output - FG: 500 Vdc
Vibration: At no operating, 10 to 55 Hz,10 min 1 cycle 19.6m/s² constant, X, Y,Z, 1 hour each
Safety: Pending, UL60950, CSA60950,EN60950
EMI5: Compliance to FCC-Class B,EN55011/EN55022-B,CISPR22 Class B
EMS Immunity5: Compliance toEN61000-4-2, -3, -4,
-5, -6, -8, -11
Weight (Typical): 620 g (21.87 oz)
Dimensions: 50 x 99 x 199 mm(1.97 x 3.9 x 7.83")
 

OMPS300A48 SPECIFICATIONS
Nominal Output Voltage: 48V
Maximum Output Current: 6.7 A
Peak Output Current: 8.7 A
Maximum Output Power: 321.6 W
Efficiency (Typical) (115/230 Vac)1:80/85%
Input Voltage Range: 85 to 265 Vac(47 to 63 Hz) or 120 to 370 Vdc
Input Current (Typical) (115/230 Vac)1:3.6/1.8 A
Inrush Current (Typical): 20 A at115 Vac, 32 A at 230 Vac, Ta = 25°C(77°F), cold start
Harmonic Current: Compliance toEN61000-3-2
Power Factor (Typical) (115/230 Vac)1:0.99/0.95
Output Voltage Range: 43.2 to 52.8
Ripple and Noise (115/230 Vac)1, 2:240 mV
Line Regulation2: 96 mV
Load Regulation2: 240 mV
Temperature Coefficient: Less than0.02%/°C
Over Current Protection3: 7.0/8.9 A
Over Voltage Protection4: 55.2 to 64.8 V
Over Temperature Protection: Yes
Hold-Up Time (Typical) (115/230 Vac)1: 20 ms
Leakage Current: 0.75 mA max,0.25 mA (typical) at 115 Vac, 0.5 mA(typical) at 230 Vac
Series Operation: Yes
Remote ON/OFF Control:Option, CN2: 4 to 10V, power ON;0 to 0.8V, power OFF
Remote Sensing: Option
Operating Temperature: -10 to 65°C(14 to 149°F)
Operating Humidity: 20 to 90% RH(no dewdrop)
Storage Temperature: -30 to 85°C(-22 to 185°F)
Storage Humidity: 10 to 95% RH(no dewdrop)
Cooling Method:Forced air by blower fan
Withstand Voltage:
    Input - Output: 3.0 KVac (20 mA)
    Input - FG: 2.0 KVac (20 mA)
    Output - FG: 500 Vac (100 mA)for 1 min
Isolation Resistance: More than 100MΩ at Ta = 25°C
(77°F) and 70% RH, Output - FG: 500 Vdc
Vibration: At no operating, 10 to 55 Hz,10 min 1 cycle 19.6 m/s² constant, X, Y,Z, 1 hour each
Safety: Pending, UL60950, CSA60950,EN60950
EMI5: Compliance to FCC-Class B,EN55011/EN55022-B,CISPR22 Class B
EMS Immunity5: Compliance toEN61000-4-2, -3, -4, -5, -6,
-8, -11
Weight (Typical): 900 g (31.75 oz)
Dimensions: 50 x 115 x 215 mm(1.97 x 4.53 x 8.46")
1 At maximum output power, nominal inputvoltage, Ta = 25°C (77°F).
2 Ripple and noise measured at bandwidth of20 MHz by using a 12" twisted pair-wireterminated with 0.1uF and 47uF parallelcapacitors.
3 Constant current limit with automaticrecovery. Avoid operating at overload ordead short for more than 60 seconds.
4 Shutdown output voltage, manual reset.Re-power on to recover.
5 This power supply is considered acomponent to be installed in final equipmentwhich should be re-confirmed to meet EMCdirectives.
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ