Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
3-A Approved Sanitary Probes with Integral Transmitter and M12 Connector
PRS-TMM12 Series
PLACE ORDER                                                 -                         4-Pin M12 Male Connector Standard.  An M12 Extension Cable is Required for Installation.                        
-                         3-A Approved RTD Sensor With Integral Transmitter                        
-                         Available with Standard or Heavy-Duty Stepped Probe                        
-                         3", 4", 5" and 6" Standard Lengths, Others Available                        
-                         1½" 16 AMP Tri-Grip (Tri-Clamp® Compatible) Fitting Standard                        
-                         316L SS Wetted Surfaces with 32 µin or Better Surface Finish                        
-                         Two Transmitter Ranges:
 -1 for -40 to 49°C (-40 to 120°F) and
 -2 for -18 to 93°C (0 to 200°F)
-                         -50 to 200°C (-58 to 392°F) Sensing Temp Range 
 85°C (185°F) Max Connector Temp
Description
                                    Description
					                    					Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation.  A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.
 The 3-A Approved trodeks® PRS-TMM12 series transducers are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries.  These transducers are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes.
The 3-A Approved trodeks® PRS-TMM12 series transducers are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries.  These transducers are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes.
The probe stems are manufactured in two configurations; standard duty probes with a ¼" diameter probe, and a heavy duty design with a stepped 3/8" to 3/16" diameter probe design for good response times.
The trodeks® PRS-TMM12 series transducers are identical to the PRS-M12 RTD sensors except for the addition of abuilt-in 4 to 20 mA transmitter inside the housing. This eliminates the need for a separate transmitter when a 4 to 20 mA signal is required for your instrumentation.  The housing cover can be removed allowing for the adjustment of the transmitter's zeroand span settings.
There are two ranges offered as standard offerings:
The TM1M12 model ranged to provide a 4-20 milliamp output between -40 and 49°C (-40 to 120°F),The TM2M12 model ranged to provide a 4-20 milliamp output between -18 and 93°C (0 to 200°F).
  Other ranges are available as special orders, please consult our sales engineers.
 A 4-Pin M12 Connector provides a quick and convenient connection point for process wiring.  Simply install an M12 extension cable to the sensor to connect it to your monitoring or control instrumentation.
			| Wiring Diagram | 
			|  | 
Sanitary Temperature Sensor Specifications Include:
316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.
Probe lengths of 3, 4, 5 or 6 inches available from stock, other lengths available as special orders.
 Standard mounting flange is 1½"-16AMP Tri-Grip in conformance with ASME BPE-2007.
  4-Pin, M12 Connector.
Thermal response time of 2.5 seconds or less in water flowing at 3 ft/sec (63% response).
4 to 20 milliamp output proportional to temperature (see ranges available).
Supply Voltage 8 to 35VDC, 24VDC recommended.
Maximum temperature range is -50 to 200°C at the sensing end, 85°C max at the connector end.
                    					                  Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ