Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Product Groups
PRE-WIRED STRAIN GAGES- Linear Gages- X-Y Planar Rosettes (Tee Rosette)- 0°-45°-90° Planar Rosettes
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
KFH Series
PLACE ORDER 
  • Pre-Wired Gages Make Installations Easy!
  • No Soldering at the Measuring Point
  • Linear Gages, 0.3 mm to 20 mm Grids
  • XY Gages (Tee Rosettes) 0.6 to 6 mm Grids
  • 0°/45°/90° Planar Rosettes 0.6 to 6 mm Grids
  • Each Gage has 50 mm of PTFE Cable before Transitioning to AWG 28 Leads to Prevent Leads from Adhering During Installation
  • Rugged Polyimide Carrier
  • Fully Encapsulated Gages for Protection from the Environment
 Specs
 Manuals (contact with email : [email protected])
 Print
Description

Description

Linear pattern precision gages withminature and medium length gridsare for general purpose and stressanalysis applications. Availablewith either two 1-meter leads orthree 3-meter leads and 120 Ω or350 Ω resistance. All models arecompensated for steel.

The planar XY pattern (0 / 90°) allowsprecision strain measurement byeliminating the errors oftenassociated with a stacked XYpattern. These gages are availablewith either two 1-meter leads orthree 3-meter leads per grid andare compensated for steel.

The planar rosette pattern (0 / 45°/ 90°) allowsprecision strain measurementby eliminating the errors oftenassociated with a stacked pattern.These gages are available witheither two 1-meter leads or three3-meter leads per grid and arecompensated for steel.

Specifications See Spec Sheet for full specifications
Strain Gage Construction Foil strain gage with embedded measuring grid
Measuring Grid
    Material Constantan
    Thickness µm (microinch) 3.8 or 5 (150 or 197), depending upon strain gage type
    Carrier Material Polyimide
    Thickness µm (microinch) 45 ± 10 (1.772 ± 394)
Connections PTFE wire, Ø - 0.051 mm², approximately 50 mm long, connected to AWG 28 ribbon cables (PVC insulated) through solder sleeves in 2- or 3-wire configurations
Nominal Resistance Ω 120 or 350 depending upon gage
Resistance Tolerance % ±0.35, with 0.6 mm and 1.5 mm grid length % ±1
Gage Factor approximately 2 (stated on package)
Gage Factor Tolerance % ±1, with 0.6 mm and 1.5 mm grid length % ±1.5, temperature coefficient of gage factor 1/K [1/°F] (115 ± 10) x 10-6 [(64 ± 5.5) x 10-6, nominal value of gage factor temperature coefficient Specified on each package
Applicable Bonding Materials
    Cold Cure Adhesives SG496, SG401
Heat Cure Adhesives TT300
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ