Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
High Pressure- High Repeatability Mass Flowmeters for Clean Gases
FMA-8500
PLACE ORDER - Up to ±1% Full Scale Accuracy
- ±0.25% of Rate Repeatability
- 316 SS Wetted Parts
- Low Pressure Drop
- For Use With Clean, Non-Coating Gases up to 4500 psig
- Calibrations Available up to 1500 psig
Description
Description
This flowmeter is precise andsophisticated. It must be accuratelycalibrated for application conditions.If in doubt, consult trodeks’s FlowDepartment.
trodeks® FMA-8500 Series highpressure mass flowmeters featurea superior ±0.25% repeatability foraccurate measurement and controlof gas flow. The flow sensor producesa 0 to 5 Vdc output signal linear to themass flow rate for use in recording,indicating, or control purposes.
SPECIFICATIONS
Accuracy: ±1% full scale at 16 to 27°C (60 to 80°F) and 10 to 40 psig; ±2% full scale at 4 to 38°C (40 to 100°F) and 5 to 150 psig
Repeatability: ±0.25%
Time Constant: Three seconds to reach 98% of final value
Max Pressure:Up to 4500 psi at 66°C (150°F)
Pressure Drop: 10" water, max
Ambient Temperature Range: 4 to 66°C (40 to 150°F)
Output: 0 to 5 Vdc into 1000 Ω min load; 3 mV rms max ripple
Power: ±15 Vdc; 0.6 W max power consumption
Fittings: ¼" 316 SS compression fitting O-Rings/Gaskets: PFA
Transducer Assembly: 316 SS
Leak Rate: 10-9 atm/cc-Helium
Pressure Coefficient: 0.03% shift within ±200 psig of the calibrated pressure
Range
| Model No. | Range |
| FMA-8500-(*) | 0 to 10 SCCM |
| FMA-8501-(*) | 0 to 20 SCCM |
| FMA-8502-(*) | 0 to 50 SCCM |
| FMA-8503-(*) | 0 to 100 SCCM |
| FMA-8504-(*) | 0 to 200 SCCM |
| FMA-8505-(*) | 0 to 500 SCCM |
| FMA-8506-(*) | 0 to 1000 SCCM |
| FMA-8507-(*) | 0 to 2000 SCCM |
| FMA-8508-(*) | 0 to 5000 SCCM |
| FMA-8509-(*) | 0 to 10 SLM |
| FMA-8510-(*) | 0 to 20 SLM |
(*) You must specify gas and inlet/outlet pressure when ordering.
1) Select the core part number from the range code table above.
2) Add the gas and inlet/output pressure information afterthe core p/n, eg.: FMA-8501-Nitrogen,20/0 psig (This is a FMA-8501 0 to 20 SCCM, flowmeter for nitrogen, with an inlet pressure of 20 psi, and outlet pressure of 0 psi)
3) Enter the Constructed part number in the "Order Specific Models Here" table below!
4) You will then add the p/n to your cart and check out with a non-std p/n.
5)We will confirm by email and/or telecon price and availability after the order is placed.
Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ